Armor epoxy

[Moff Man]

As i found out at the Weird Al show , hot glue doesn't stick to ABS very well ( thank Crom for white ducktape). Jay mentioned that you need epoxy to glue those snaps on real good. Can you give me some names or leads on what type or brand i should use?


Thanks Moff

[Terrell78]

Devcon plastic welder, available only at Wal-Mart.

[Hyper]

iI did find Devcon at Nankin Hardware once but it was about 2 dollars more. Wall Mart's the way to go

[Moff Man]

I would pay $2.00 more for it at a local store then set foot in a wal mart . I found some online for around $4.25 each including shipping .


Thanks Guys for your hellp.

MOFF

[Crimson]

E6000 is also a good all-purpose adhesive, without the nasty epoxy smell. I've seen it at Meijer in the hardware section and at Michael's & JoAnn where the other adhesives are. It starts out as a viscous liquid, but it gels over time, which makes it really easy to work with then.

[Ripcode]

E6000 is also a good all-purpose adhesive, without the nasty epoxy smell. I've seen it at Meijer in the hardware section and at Michael's & JoAnn where the other adhesives are. It starts out as a viscous liquid, but it gels over time, which makes it really easy to work with then.

I would use E6000 if you want to be able to take something apart later.

Devcon Plastic Welder is fairly permanent in it's hold.

[Crimson]

And even after 3 years, I still find that I need to do periodic adjustments to my TK pieces. The thighs are currently held together with clear cellophane packaging tape...from last year's Griffins game!

[Moff Man]

Ace hardware had some Devcon online, had to buy a case but hey i will never run out now ( i hope) Off to redo all my snaps now.

[Terrell78]

Make sure it's Devcon plastic welder and not Devcon plastic epoxy. The epoxy is black .

[Moff Man]

whew made me nervous there for a sec. It's in a black tube but the backing card reads Plastic welder and its a blue grey color. How much is it at Wal Mart ?

[Ripcode]

Make sure it's Devcon plastic welder and not Devcon plastic epoxy. The epoxy is black .

You can also use Super Glue Plastic Fusion. It is a 2-part epoxy that is pretty much the same as Devcon Plastic Welder.

I have used both and they perform (and stink the same while drying) equally well.

[Terrell78]

I can't find Plastic Fusion on the east side of the state. I got mine from a friend in Oregon.

[Ripcode]

I can't find Plastic Fusion on the east side of the state. I got mine from a friend in Oregon.

Kmart has it here.

[Terrell78]

Kmart has it here.

They still have those .

[Crimson]

Yeah, they're just called "S-Mart" now.

[Moff Man]

Ok thanks guys, i got my snaps all reglued with Devcon Plastic welder and I did it without stepping foot in WalMart .Man that epoxy REEEEEEEEKS .... I think i am all ready for another test run and that will be saturday at Emagine. Hope to see a lot of you there.

[Terrell78]

whew made me nervous there for a sec. It's in a black tube but the backing card reads Plastic welder and its a blue grey color. How much is it at Wal Mart ?

The price is $2.72