Time for a big gun, but I'll need help

Ask about costumes and props here. Please read the FAQs first before asking questions -- your question may have already been answered!
User avatar
Lumpy
GLG Member
GLG Member
Posts: 7889
Joined: Sat Aug 23, 2008 9:28 am
Legion ID: 7189
Location: Kashyyyk

Time for a big gun, but I'll need help

Post by Lumpy »

I'm looking into getting a kit to build an MG-34 to go with my Biker Scout costume.

Image

If I go through with this, I assume I can count on my GLG brothers and sisters to help with advise on the assembly and such??
Thanks,
Chris
User avatar
Mowskwoz
GLG Member
GLG Member
Posts: 3399
Joined: Wed Oct 15, 2008 10:53 pm
Legion ID: 7794
Location: Livonia, MI

Re: Time for a big gun, but I'll need help

Post by Mowskwoz »

That gun in the DLT-19 configuration(same as MG-34 but with a few small added details) is on my wish list.
Are you looking to buy one or make a scratchbuilt one?
Sci-Fire made a great hyperfirm MG-34 but it's kind of pricey. I am currently looking for a good scratch built tutorial. I found one a while back but can't remember where. If I find it again, I'll post it for you. :thumbs:
GLG Commanding Officer - 2012-2018, 2020
GLG Captain of the Guard - 2019
ANH Stormtrooper - F.I.S.D. Expert Infantryman
GLB X-Wing Pilot - Shadow 77
Snowtrooper Commander - Thunder Snow Assault Squad
R2 Builder
User avatar
Lumpy
GLG Member
GLG Member
Posts: 7889
Joined: Sat Aug 23, 2008 9:28 am
Legion ID: 7189
Location: Kashyyyk

Re: Time for a big gun, but I'll need help

Post by Lumpy »

There is a post on the Legion board of someone selling kits (and made ones but I'm not made of money!!).
I sent him an email asking for info.
User avatar
DarthFOO
GLG Member
GLG Member
Posts: 275
Joined: Thu Jun 19, 2008 4:08 pm
Legion ID: 9807
Location: Hudsonville, MI

Re: Time for a big gun, but I'll need help

Post by DarthFOO »

Check with Cushman in Detroit, He is all about WWII replicas, and this is a German machine gun.
"Me Sniper, You Pilot. Understand the difference?" FOO
User avatar
Lumpy
GLG Member
GLG Member
Posts: 7889
Joined: Sat Aug 23, 2008 9:28 am
Legion ID: 7189
Location: Kashyyyk

Re: Time for a big gun, but I'll need help

Post by Lumpy »

Very cool!! Thanks, FOO.
I figure I could get away with just not adding the "paintball parts"??
User avatar
Wags
Garrison Armor Consultant
Garrison Armor Consultant
Posts: 2861
Joined: Thu Jun 14, 2007 12:32 am
Legion ID: 7195
Location: Allen Park, Mi 48101

Re: Time for a big gun, but I'll need help

Post by Wags »

I just bought a 1/6th scale replica of the MG-34. Can u figure out what I did that for?????? :evil:
User avatar
Mowskwoz
GLG Member
GLG Member
Posts: 3399
Joined: Wed Oct 15, 2008 10:53 pm
Legion ID: 7794
Location: Livonia, MI

Re: Time for a big gun, but I'll need help

Post by Mowskwoz »

He has the non-paintball replicas on this page.

http://home.comcast.net/~roja/Replicas_Star_Wars.html

I've heard that the Cushman guns are not very durable and lack detail. The big guns on the site look good but the E-11 looks bad, in my opinion. Has anyone here had any experience with them? ~Mow
GLG Commanding Officer - 2012-2018, 2020
GLG Captain of the Guard - 2019
ANH Stormtrooper - F.I.S.D. Expert Infantryman
GLB X-Wing Pilot - Shadow 77
Snowtrooper Commander - Thunder Snow Assault Squad
R2 Builder
User avatar
Mowskwoz
GLG Member
GLG Member
Posts: 3399
Joined: Wed Oct 15, 2008 10:53 pm
Legion ID: 7794
Location: Livonia, MI

Re: Time for a big gun, but I'll need help

Post by Mowskwoz »

Wags wrote:I just bought a 1/6th scale replica of the MG-34. Can u figure out what I did that for?????? :evil:
Something awesome and for me I hope. :lol:
GLG Commanding Officer - 2012-2018, 2020
GLG Captain of the Guard - 2019
ANH Stormtrooper - F.I.S.D. Expert Infantryman
GLB X-Wing Pilot - Shadow 77
Snowtrooper Commander - Thunder Snow Assault Squad
R2 Builder
User avatar
Lumpy
GLG Member
GLG Member
Posts: 7889
Joined: Sat Aug 23, 2008 9:28 am
Legion ID: 7189
Location: Kashyyyk

Re: Time for a big gun, but I'll need help

Post by Lumpy »

According to the site, the non-paintball Cushman's are made of .060 plastic and weighs between 3 and 4 pounds. The kit I found on the 501st site weighs 11 pounds and are made from what he calls "Rubber resin" which they claim is not brittle.
The Cushman's is $165 assembled and painted.
I'm still waiting on a price with postage from the other guy, but the price listed in the post is $220 for the kit that I would have to trim, assemble and paint.

I did find a guy in the post who says he has a Cushmans that "died a slow death" (whatever that means). I think I'll send him a PM and ask his opinion of the Cushmans. Since I got approved with Vader, I don't troop my TB a ton, so if the Cushman's is OK, I might just go with that.

I would still love to hear people's opinions on the subject.

Thanks!!! :thumbs:
User avatar
Kal
GLG Member (Reserve)
GLG Member (Reserve)
Posts: 3797
Joined: Tue Apr 25, 2006 7:38 pm
Legion ID: 2280
Location: Livona ,MICHIGAN

Re: Time for a big gun, but I'll need help

Post by Kal »

jaster has a cushman for his RC . may want to ask him
COTF Darth Nihilus-Done
Kal Skirata- DONE -501st Legions 1st ever Approved
Jango Fett - 40%
User avatar
Hyper
GLG Member
GLG Member
Posts: 1393
Joined: Sun May 04, 2008 4:48 pm
Legion ID: 4408

Re: Time for a big gun, but I'll need help

Post by Hyper »

Here is another,....I have one of his E-11 resin kits
http://forum.whitearmor.net/index.php?showtopic=3609
User avatar
Ducktrooper
GLG Member (Reserve)
GLG Member (Reserve)
Posts: 1020
Joined: Thu Feb 07, 2008 5:20 pm
Legion ID: 3771
Location: Romulus,MI

Re: Time for a big gun, but I'll need help

Post by Ducktrooper »

If you get a cushman buy the kit form and then give it to me and Wags we will trick it out. Dont spend the money to have them build them. we can drill out the barrel holes add an inner barrel and paint it up as they come they are weak on detail and look like a vacuformed toy. They can be made to look nice with a lot of work, skill and time.
David "Ducktrooper "TK-3771
FISD
Member of the Kilted Trooper Brigade
Mt Clemens, MI.

From the Beyond
User avatar
Lumpy
GLG Member
GLG Member
Posts: 7889
Joined: Sat Aug 23, 2008 9:28 am
Legion ID: 7189
Location: Kashyyyk

Re: Time for a big gun, but I'll need help

Post by Lumpy »

Sweet!!
Thanks Duck!!
User avatar
Kal
GLG Member (Reserve)
GLG Member (Reserve)
Posts: 3797
Joined: Tue Apr 25, 2006 7:38 pm
Legion ID: 2280
Location: Livona ,MICHIGAN

Re: Time for a big gun, but I'll need help

Post by Kal »

CBlack wrote:Sweet!!
Thanks Duck!!
Thank god we got him back from CA :cheers:
COTF Darth Nihilus-Done
Kal Skirata- DONE -501st Legions 1st ever Approved
Jango Fett - 40%
User avatar
Wags
Garrison Armor Consultant
Garrison Armor Consultant
Posts: 2861
Joined: Thu Jun 14, 2007 12:32 am
Legion ID: 7195
Location: Allen Park, Mi 48101

Re: Time for a big gun, but I'll need help

Post by Wags »

Amen to that!!!!!!!!!!!! :cheers:
User avatar
Lumpy
GLG Member
GLG Member
Posts: 7889
Joined: Sat Aug 23, 2008 9:28 am
Legion ID: 7189
Location: Kashyyyk

Re: Time for a big gun, but I'll need help

Post by Lumpy »

hear, hear!! :cheers: :cheers:
User avatar
Zachg56
GLG Member (Reserve)
GLG Member (Reserve)
Posts: 532
Joined: Thu Jan 22, 2009 3:29 pm
Location: Everywhere

Re: Time for a big gun, but I'll need help

Post by Zachg56 »

http://www.ima-usa.com/index.php

That website has a demilled MG if you want to go all out....but they tend to be sort of heavy...
User avatar
Jaster
GLG Member (Reserve)
GLG Member (Reserve)
Posts: 3329
Joined: Sun Nov 16, 2003 12:23 am
Legion ID: 3829
Location: Casco, MI

Re: Time for a big gun, but I'll need help

Post by Jaster »

Cushman guns are extremely soft in the detail department and require lots of work to make them look realistic. You'd be better off talking to a certain member of our garrison who makes these guns the last time I checked.
Image
User avatar
Ripcode
GLG Member (Reserve)
GLG Member (Reserve)
Posts: 5518
Joined: Mon Oct 02, 2006 3:12 pm
Legion ID: 9296
Location: Muskegon, MI

Re: Time for a big gun, but I'll need help

Post by Ripcode »

Due to the lack of details and for what little you get for the money, I personally would not buy any Cushman products.

I've seen time and time again people who buy them and sell them later to "upgrade" to something different.
Image
User avatar
Lumpy
GLG Member
GLG Member
Posts: 7889
Joined: Sat Aug 23, 2008 9:28 am
Legion ID: 7189
Location: Kashyyyk

Re: Time for a big gun, but I'll need help

Post by Lumpy »

That's kind of the general consensus I've gotten. I heard back from a trooper in Australia who had a Cushman's and never even finished it before selling it to get something better.

Maybe that "certain member" will read this and contact me and see if we can work something out (if he still makes them that is).

Thanks for all the info!!!!!! :thumbs: :thumbs:
Post Reply