41st Elite Clone w.i.p.

Ask about costumes and props here. Please read the FAQs first before asking questions -- your question may have already been answered!
User avatar
DeafTrooper
GLG Mart Greeter
GLG Mart Greeter
Posts: 1938
Joined: Fri Feb 25, 2011 4:55 pm
Legion ID: 7859
Location: Cottrellville, MI USA
Contact:

41st Elite Clone w.i.p.

Post by DeafTrooper »

Got my bucket last week. Ordered the armor the other day...should arrive by the end of next month. Got the mouth grills and the visor section cut out.
Image

Need to find a place that has big size aerators. The ones at the hardware store are to small. I want to hollow out the ones that came with the bucket and attach the screens so that I can attach fans behind of each one. I was going to try and carve out a lot of the inside of the mask to try and fit my glasses, but a lot of people advised against it. Decided to give up on that aspect, as I don't want to go the face removal route.
CT/ID-7859
User avatar
Wags
Garrison Armor Consultant
Garrison Armor Consultant
Posts: 2850
Joined: Thu Jun 14, 2007 12:32 am
Legion ID: 7195
Location: Allen Park, Mi 48101

Re: 41st Elite Clone w.i.p.

Post by Wags »

U dont want the sink ones. They arent right. I might have a set I can send you. Stand by!
User avatar
Harp
GLG Member
GLG Member
Posts: 441
Joined: Tue Jan 01, 2008 4:57 pm
Legion ID: 6734
Location: Wixom, MI

Re: 41st Elite Clone w.i.p.

Post by Harp »

Boy does this bring back memories! The helmet in it's raw state like a blank canvas. Working on the helmet was by far my favorite part of my 327th Star Corps build. I'm looking forward to seeing the progress pics. Best of luck! :thumbs:
Biker Scout = Complete
327th Star Corps Clone Trooper = Retired
User avatar
Wags
Garrison Armor Consultant
Garrison Armor Consultant
Posts: 2850
Joined: Thu Jun 14, 2007 12:32 am
Legion ID: 7195
Location: Allen Park, Mi 48101

Re: 41st Elite Clone w.i.p.

Post by Wags »

Ok, I have an extra set of a MR bucket. I have to do a little work to them so give me some time. I will get to work as soon as possible :thumbs:
User avatar
Kal
GLG Member (Reserve)
GLG Member (Reserve)
Posts: 3797
Joined: Tue Apr 25, 2006 7:38 pm
Legion ID: 2280
Location: Livona ,MICHIGAN

Re: 41st Elite Clone w.i.p.

Post by Kal »

Wags wrote:Ok, I have an extra set of a MR bucket. I have to do a little work to them so give me some time. I will get to work as soon as possible :thumbs:

look at you! posting at this time. Must be like'n the new shift. Hope it lasts a bit more longer for you sir.
COTF Darth Nihilus-Done
Kal Skirata- DONE -501st Legions 1st ever Approved
Jango Fett - 40%
User avatar
DeafTrooper
GLG Mart Greeter
GLG Mart Greeter
Posts: 1938
Joined: Fri Feb 25, 2011 4:55 pm
Legion ID: 7859
Location: Cottrellville, MI USA
Contact:

Re: 41st Elite Clone w.i.p.

Post by DeafTrooper »

Wags wrote:U dont want the sink ones. They arent right. I might have a set I can send you. Stand by!
Ok, thanks Wags! I had heard of people canibalizing the screens out of the plumbing hardware and using those after hollowing out the ones on the helmet. Was looking to do the same, but couldn't find any big enough. Also heard of people adding a piece of the grill from a car speaker to it instead. Was thinking of that option too. Was hoping Evo3 had some leftovers of the ones he made years ago, but he was out. Also going to try and find some 25mm size fans and battery pack tomorrow at a hobby store, to go behind the aerators. I just cut out some space in my Evo3 bucket to make room to install them.
Last edited by DeafTrooper on Thu Mar 24, 2011 9:07 pm, edited 1 time in total.
CT/ID-7859
User avatar
Wags
Garrison Armor Consultant
Garrison Armor Consultant
Posts: 2850
Joined: Thu Jun 14, 2007 12:32 am
Legion ID: 7195
Location: Allen Park, Mi 48101

Re: 41st Elite Clone w.i.p.

Post by Wags »

I just picked up a new EVO3 bucket and binocs as well!!! He makes great stuff.

So you did get a set from him with your bucket right? If so, they are the same ones that i have that are extra, but they are off the MR, so it wont really do you any good. :mrgreen:

Keep an eye out though, Evo3 does aluminum ones from time to time. i have a set on my current bucket that I have to take off and put on the new lid.
User avatar
DeafTrooper
GLG Mart Greeter
GLG Mart Greeter
Posts: 1938
Joined: Fri Feb 25, 2011 4:55 pm
Legion ID: 7859
Location: Cottrellville, MI USA
Contact:

Re: 41st Elite Clone w.i.p.

Post by DeafTrooper »

Yep, got a set with the bucket. I just wanted something that will let me blow air through them for circulation. He was saying something about needing to find a new machinist if he ever makes the aluminum ones again. Apparently, he was having problems with all the other ones.
CT/ID-7859
User avatar
Wags
Garrison Armor Consultant
Garrison Armor Consultant
Posts: 2850
Joined: Thu Jun 14, 2007 12:32 am
Legion ID: 7195
Location: Allen Park, Mi 48101

Re: 41st Elite Clone w.i.p.

Post by Wags »

I have a drill press and bits that are wide enough to drill them out. Just let me know. :thumbs:
User avatar
DeafTrooper
GLG Mart Greeter
GLG Mart Greeter
Posts: 1938
Joined: Fri Feb 25, 2011 4:55 pm
Legion ID: 7859
Location: Cottrellville, MI USA
Contact:

Re: 41st Elite Clone w.i.p.

Post by DeafTrooper »

Wags wrote:U dont want the sink ones.
forgot to ask...are you talking about the entire assembly or just the screens?
CT/ID-7859
User avatar
Ripcode
GLG Member
GLG Member
Posts: 5518
Joined: Mon Oct 02, 2006 3:12 pm
Legion ID: 9296
Location: Muskegon, MI

Re: 41st Elite Clone w.i.p.

Post by Ripcode »

I have one (1) fan in my clone helmet. It's not over the vents. It's right under my chin and blows air up and across the lens so I never have fogging issues. I only run it as needed.
Image
User avatar
DeafTrooper
GLG Mart Greeter
GLG Mart Greeter
Posts: 1938
Joined: Fri Feb 25, 2011 4:55 pm
Legion ID: 7859
Location: Cottrellville, MI USA
Contact:

Re: 41st Elite Clone w.i.p.

Post by DeafTrooper »

Hmm, that's another option to think about. Basically, I just wanted a way of having 1 fan blowing inwards and another blowing outwards. I heard that it can get pretty hot in these costumes and heard the hollow aerators option is what a lot of other people do to help with air circulation.
CT/ID-7859
User avatar
Ripcode
GLG Member
GLG Member
Posts: 5518
Joined: Mon Oct 02, 2006 3:12 pm
Legion ID: 9296
Location: Muskegon, MI

Re: 41st Elite Clone w.i.p.

Post by Ripcode »

DeafTrooper wrote:Hmm, that's another option to think about. Basically, I just wanted a way of having 1 fan blowing inwards and another blowing outwards. I heard that it can get pretty hot in these costumes and heard the hollow aerators option is what a lot of other people do to help with air circulation.
I am going to removed the hollow aerators and put back the solid MR ones back on mine.
Image
User avatar
Wags
Garrison Armor Consultant
Garrison Armor Consultant
Posts: 2850
Joined: Thu Jun 14, 2007 12:32 am
Legion ID: 7195
Location: Allen Park, Mi 48101

Re: 41st Elite Clone w.i.p.

Post by Wags »

Dont listen to Rip, the man never sweats... :rotflmao: :rotflmao: I, on the other hand, sweat in the shower. I have 3 fans, run them non stop, have on blowing out and one sucking in my aerators. And Im still hot, but, like I said, I sweat in the shower... :rotflmao:
User avatar
Wags
Garrison Armor Consultant
Garrison Armor Consultant
Posts: 2850
Joined: Thu Jun 14, 2007 12:32 am
Legion ID: 7195
Location: Allen Park, Mi 48101

Re: 41st Elite Clone w.i.p.

Post by Wags »

DeafTrooper wrote:
Wags wrote:U dont want the sink ones.
forgot to ask...are you talking about the entire assembly or just the screens?
The entire assembly. They are way too small. The clones look nothing like TK's.
User avatar
Lou3433
GLG Member (Reserve)
GLG Member (Reserve)
Posts: 495
Joined: Sun Jan 29, 2006 9:25 am
Legion ID: 3433
Location: South Haven

Re: 41st Elite Clone w.i.p.

Post by Lou3433 »

When I made my 41st elite. I had two fans, one sucking in one blowing out. I got some ipod speakers from the dollar store that I tore apart and used the speaker grill from that to put in my aerators.

Man...I miss that costume. I need to build another...soon! :D
Lou Rodriquez
User avatar
DeafTrooper
GLG Mart Greeter
GLG Mart Greeter
Posts: 1938
Joined: Fri Feb 25, 2011 4:55 pm
Legion ID: 7859
Location: Cottrellville, MI USA
Contact:

Re: 41st Elite Clone w.i.p.

Post by DeafTrooper »

Wags wrote:The entire assembly. They are way too small. The clones look nothing like TK's.
Ok. No, I was just going to take the screen out of the sink ones and glue them in after i hollowed out the helmet ones.
CT/ID-7859
User avatar
DeafTrooper
GLG Mart Greeter
GLG Mart Greeter
Posts: 1938
Joined: Fri Feb 25, 2011 4:55 pm
Legion ID: 7859
Location: Cottrellville, MI USA
Contact:

Re: 41st Elite Clone w.i.p.

Post by DeafTrooper »

Lou3433 wrote:When I made my 41st elite. I had two fans, one sucking in one blowing out. I got some ipod speakers from the dollar store that I tore apart and used the speaker grill from that to put in my aerators.

Man...I miss that costume. I need to build another...soon! :D
Oh crap, I'm an idiot! :roll2: :D I completely forgot that I have a bunch of cheap computer speakers in storage that I don't even use. Those small ones that always come with a new desktop pc.
CT/ID-7859
User avatar
DeafTrooper
GLG Mart Greeter
GLG Mart Greeter
Posts: 1938
Joined: Fri Feb 25, 2011 4:55 pm
Legion ID: 7859
Location: Cottrellville, MI USA
Contact:

Re: 41st Elite Clone w.i.p.

Post by DeafTrooper »

Does anyone know of any hobby stores in St. Clair or northern Macomb Counties? Past Time Hobbies in Port Huron is no longer around and I need 2- 25mm fans for my helmet.

I'd google it, but I'm too tired to even bother.
CT/ID-7859
User avatar
Jaster
GLG Member (Reserve)
GLG Member (Reserve)
Posts: 3329
Joined: Sun Nov 16, 2003 12:23 am
Legion ID: 3829
Location: Casco, MI

Re: 41st Elite Clone w.i.p.

Post by Jaster »

Image
Post Reply