Waterford

Post by **Mwaynick** » Tue Aug 02, 2016 8:01 pm

Hey everyone I was wondering if any Armor parties were happening in or around the Waterford area in the coming month or months?

Post by **ShermiesRule** » Tue Aug 02, 2016 9:15 pm

I'm not an expert but I have most of my Anovos TK cut. I need assistance measuring and strapping. I'm in West Bloomfield so I'm not far at all.

Here is my progress

: image.jpeg (1.43 MiB) Viewed 28696 times

Post by **Mwaynick** » Tue Aug 02, 2016 10:28 pm

ShermiesRule wrote:I'm not an expert but I have most of my Anovos TK cut. I need assistance measuring and strapping. I'm in West Bloomfield so I'm not far at all.

Here is my progress
image.jpeg

Nice, yeah I have a full suit but it was made for sombody who's 6'2 and I'm only 5'7 everything fits fine except for the thigh pieces.

Post by **Mwaynick** » Wed Aug 03, 2016 12:06 pm

: image.jpeg (1.65 MiB) Viewed 28675 times

Post by **mbone** » Wed Aug 03, 2016 3:41 pm

Looks great to me!

Post by **Gator Fett** » Wed Aug 03, 2016 3:53 pm

Suit looks good. You definitely need to trim some off of the thighs for comforts sake as well as accuracy.

Have you submitted your photos to the GML (Ripcode on this site)?

If not, send them in with your application and he can give you a rundown of what you need to tweek for approval.

Were in Waterford are you located?

Post by **Mwaynick** » Wed Aug 03, 2016 4:10 pm

Gator Fett wrote:Suit looks good. You definitely need to trim some off of the thighs for comforts sake as well as accuracy.

Have you submitted your photos to the GML (Ripcode on this site)?

If not, send them in with your application and he can give you a rundown of what you need to tweek for approval.

Were in Waterford are you located?

I live off Cooley lake Rd next to OCC campus.

Post by **Mwaynick** » Wed Aug 03, 2016 4:13 pm

mbone wrote:Looks great to me!

Thanks

Post by **Gator Fett** » Wed Aug 03, 2016 4:43 pm

Mwaynick wrote:I live off Cooley lake Rd next to OCC campus.

I'm up in Clarkston, off of Dixie and White Lake Rd.

Let me know when you get some feedback from Ripcode and I may be able to help you make the mods.

Post by **Mwaynick** » Wed Aug 03, 2016 5:37 pm

Gator Fett wrote:
Mwaynick wrote:I live off Cooley lake Rd next to OCC campus.
I'm up in Clarkston, off of Dixie and White Lake Rd.

Let me know when you get some feedback from Ripcode and I may be able to help you make the mods.

I'm new to forums and what not...how do I contact him?

Post by **Mwaynick** » Wed Aug 03, 2016 5:38 pm

Or maybe we can meet up and you can see for yourself what needs to be done mainly the thighs and shin pieces they're a bit long. Other than that everything else fits fine.

Post by **ShermiesRule** » Fri Aug 05, 2016 12:41 am

Are you planning on cutting some off the top like I did? That's a piece of cake. If you're by OCC Highland Lakes we are less than 10 miles

Post by **Mwaynick** » Fri Aug 05, 2016 12:16 pm

ShermiesRule wrote:Are you planning on cutting some off the top like I did? That's a piece of cake. If you're by OCC Highland Lakes we are less than 10 miles

Yeah I live by the highland lakes campus, and yes the thighs need to be trimmed

Post by **ShermiesRule** » Fri Aug 05, 2016 7:57 pm

See my pic. I traced a new line parallel to the existing edges and used a dremel wheel to take off an inch

Post by **Mwaynick** » Sat Aug 06, 2016 7:11 pm

ShermiesRule wrote:See my pic. I traced a new line parallel to the existing edges and used a dremel wheel to take off an inch

$20.00 I would just screw it up, also I have to go buy a dremel lol.

Post by **Mwaynick** » Wed Aug 24, 2016 8:03 pm

Mwaynick wrote:
ShermiesRule wrote:See my pic. I traced a new line parallel to the existing edges and used a dremel wheel to take off an inch

$20.00 says I would just screw it up, also I have to go buy a dremel lol.

Post by **lordphelgar** » Sat Sep 10, 2016 8:39 pm

Mwaynick wrote:
Mwaynick wrote:
ShermiesRule wrote:See my pic. I traced a new line parallel to the existing edges and used a dremel wheel to take off an inch

$20.00 says I would just screw it up, also I have to go buy a dremel lol.

Did you find any help around the area , I'm in ferndale and I got my armor a couple weeks ago , I've got it trimmed up and cleaned up but I'm scared to start glueing everything together. It would be great to get some guidance with everything. I have 3 days off a week and I'm willing to drive wherever to get some help with this stuff , the last thing I want to do is mess everything up . I'm used to working with metal and not plastics , if I screw up a piece of metal I know know how to fix that but plastic is a whole different animal.

Post by **Deadeye** » Mon Sep 12, 2016 10:25 pm

I'm in the home stretch on my AP build:
http://www.whitearmor.net/forum/topic/3 ... c-therapy/
So I've recently gone through most of the build steps. I'm in the Bloomfield Hills area and could probably offer some assistance if anyone would like my help. I don't claim to be an expert at any of this but so far the feedback has been positive on what I've done. I also have some of the tools and stuff that may help you avoid buying some. I hope to be submitting my photos for approval by the end of this week.

Post by **Zarlon** » Wed Sep 14, 2016 2:18 pm

I don't know of any armor parties coming up and don't have room to host one myself but if anyone need some advice feel free to PM me.

Post by **Talon Ren** » Thu May 18, 2017 10:58 pm

I'm in Waterford too. On Elizabeth Lake off Cass-Elizabeth road. Are you going to Motor City CC this weekend?

Great Lakes Garrison & Base

Waterford

Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford

Re: Waterford